- Order number: ESK8B10496
The Junsi iCharger 4010 is a compact 2 x 1400 Watt Charger which features an integrated balancer, USB port and micro SD-Card slot to save logs.
Microprocessor driven High-Performance fast-charger/discharger with balancer
Supported battery types: LiIo/LiPo/LiFe, NiMH/NiCd, Pb
Number of cells: 1-10 LiIo/LiPo/LiFe, 1-25 NiMH/NiCd, 1-18 Pb (2-36 V)
Input voltage: 9-50 V direct current
Input current: < 65A
Charging Power max.(asynchronous): 2 x 1400W with >23.5V
Charging Power max.(synchronous): 2000W with >23.5V
asynchronous means one battery(pack) per terminal
synchronous means both terminals are powered in parallel.
Charging power with Input voltage > 23V: Max. 1000W
Charging power with Input voltage 12V: Max. 500W
Charging current: 2 x 0.05 - 40A (asynchronous)
Charging current: 0.05 - 70A (synchronous)
Discharge power max.: 200W synchronous, 130W asynchronous
Discharge current: 0.05 - 70A
Regenerative discharge: up to 1400W asynchronous, 2000W synchronous
Regenerative discharge = Current is beeing fed into a lead battery
Discharge with eternal load max.: 1600W 40V/40A or 3200W synchronous
Balancer current: 1.2A per terminal and cell or 2.4A in synchronous mode
Balancer accuracy: <10mV
automatic fan control - 2 fan
USB Port
Micro SD Slot to save logs and data
further functions:
Measuring the inner resistance per cell
Firmware Update via USB possible
Dimensions: 210.0×140.1×80.2 ±0.5mm
Weight: 1470g
Contents:
Junsi iCharger 4010 Duo
2x Balancer board XH
2x Balancer cable 11-pin for balancer board XH
2x charging cable 2,5 mm² with banana plug
1x Input cable 4 mm² to 5,5 mm connector
1x Mini USB Cable
CD-Rom with manual and software in English
Notice: included are only balancer boards for batteries with XH connector. If a different board is needed, it may be found in the accessories tab below.
Charging voltage: | 2 - 36V |
Input voltage: | 9 - 50 V DC |
Charging current: | 2x 0,05 - 40A Asynchronous, 0,05 - 70A Synchronous |
Charging power: | 1000 W when > 23 V Input Voltage, 500 W at 12 V input Voltage |
Amount of Cells - Lead: | 1 - 18 |
special features: | Micro SD-Card slot, USB port, Asynchronous charging, Measurement of the internal resistance of the cells, Updateable Firmware, automatic fan controller |
Number of fans: | 2 Fans |
Input current: | < 65 A |
Balancer current: | 1.2A Synchron, 2.4A Asynchron |
Balancer accuracy: | < 10 mV |
Amount of Cells - NiMH: | 1 - 25 |
Amount of Cells - Lithium: | 1 - 10 |