Junsi iCharger 406 DUO Charger - 2x700W

Junsi iCharger 406 DUO Charger - 2x700W
This product is currently not available.
€324.95 *

Prices incl. VAT plus shipping costs

Backorder. Delivery time approx. 5-10 working days

  • ESK8B10497
The Junsi 406 DUO 1400 Watt charger features an integrated balancer. USB connector and micro... more
Junsi iCharger 406 DUO Charger - 2x700W

The Junsi 406 DUO 1400 Watt charger features an integrated balancer. USB connector and micro sd-card slot to save logs.

Microprocessor driven High-Performance fast-charger/discharger and balancer
Supported battery types: LiIo/LiPo/LiFe/NiZn, NiMH/NiCd, Pb
Cell count: 1-6 LiIo/LiPo/LiFe/NiZn, 1-16 NiMH/NiCd, 1-12 Pb (2-24 V) 
Input voltage: DC 10-30 V
Input current: < 60A - per channel <47A
Charging power max.(asynchronous): 1400W - 2 x 700W with >23.5V (Every terminal is capable of max. 1000W)
Charging power max.(synchronous): 1400W with >23.5V

asynchronous means one battery(pack) per terminal
synchronous means the 2 terminals are being switched to parallel to load one batter(pack) with more power

Charging power at input voltage > 23.5V: Max. 1400W
Charging power at input voltage 12V:  >500W when using one channel, both channels combined >645W
Charging current: 2 x 0.05 - 40A  (asynchronous)
Charging current: 0.05 - 50A (synchronous)
Discharging power max.: 140W synchronous, 2 x 70W asynchronous (one of the terminals is able to max. 80W).
Discharging current: 2 x 0.05 - 40A (asynchronous), 0.05 - 50A (synchronous)
Regenerative discharging: up to 1000W asynchronous, 1400W synchronous

Regenerative discharging = Using the current to charge a lead battery
Discharging with eternal load max.: 2000W 35V/40A (each terminal max. 1000W)
Balancer-Current: 1.2A per Terminal and  cell or 2.4A in synchronous modus
Balance accuracy: <10mV
automatic fan control - 2 fans
USB Port: 5V/1A (Current limiting at 1.2A)
Micro SD slot to save logs and data
Dimensions: 172×117.8×58.8 ±0.5mm
weight: 0,91 kg

further functions:
Messuring of the internal resistance by cell
Servo test
Firmware Update via USB.

Junsi iCharger 406 Duo
2x Balancer board XH - combined on one board - can be split
2x Balancer cable 7-pin for Balancer board XH
2x Charging cable 2,5 mm² with banana plugs
1x Input cable 4 mm² to 5,5 mm connector
CD-Rom with software and instructions in English

Caution this charger only comes with a balancer board for batteries with XH-connector. If you need a different boards, you can order it under the accessories tab

special features: Micro SD-Card slot, USB port, Measurement of the internal resistance of the cells, Updateable Firmware, automatic fan controller, Servotest
Amount of Cells - Lead: 1 - 12
Input current: < 60 A , < 47 A per Channel
Charging current: 2x 0,05 - 40A Asynchronous, 0,05 - 50A Synchronous
Charging power: 2 x 700 W asynchronous at > 23 V input Voltage, 1400 W synchronous at > 23 V input Voltage
Charging voltage: 2 - 24V
Input voltage: 10 - 30 V DC
Number of fans: 2 Fans
Balancer current: 1.2A Synchron, 2.4A Asynchron
Balancer accuracy: < 10 mV
Amount of Cells - NiMH: 1 - 16
Amount of Cells - Lithium: 1 - 6
Read, write and discuss reviews... more
Customer Reviews for "Junsi iCharger 406 DUO Charger - 2x700W"
Write a Review
Reviews will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.