Close filters
 
  •  
from to
1 From 2
No results were found for the filter!
E-Toxx Adjustable Baseplate for Matrix II E-Toxx Adjustable Baseplate for Matrix II
E-Toxx Adjustable Baseplate for Matrix II
Pair of Aluminium Baseplate Matrix II, machined from 7075 Alloy Fits for Matrix II Truck, Direct Fit, just swap against the plastic part Fits for Front or Rear Truck, For Mountainboard Decks and Skatedecks Adjustable +/- 50 degrees...
Content 2 Pieces
€178.00 *
E-Toxx Drive Guard E-Toxx Drive Guard
E-Toxx Drive Guard
Schütze die Unterseite deines Direct Drive, Alien APS 80mm Drive oder Mini Direct Drive. 3-D gedruckt aus TPU Material. Lieferumfang: 2 Drive Guards Schrauben
€19.50 *
Alien APS 80mm Motor Adapter Alien APS 80mm Motor Adapter
Alien APS 80mm Motor Adapter
With this adapter you can mount an Alien 80mm motor on your Direct Drive or Chain Drive With Chain Drive you can mount up to 8085 motors. Delivery: 2 adapters screw
€63.36 *
Riser und angled Riser MBS Riser und angled Riser MBS
Riser und angled Riser MBS
Fits on Matrix 2 trucks 3D printed You can change the angle of your trucks and tailor your board to your wishes "-" means that you decrease the angle of your truck by 5 or 10 degrees. "+" means that you increase the angle of your truck...
From €11.60 *
E-Toxx Grap Handle E-Toxx Grap Handle
E-Toxx Grap Handle
Fits standart MTB - M5 Baseplate Holes Could be mounted in Front or Rear or both 5mm Thick Parts are made from highest possible grade Aluminium 7075-T6
€43.87 *
E-Toxx Motor Guard Maxi MBS E-Toxx Motor Guard Maxi MBS
E-Toxx Motor Guard Maxi MBS
Fits for MBS Matrix 2 Truck Could be mounted in Front or Rear or both Works with : MAXI Gear Box Drive Direct Drive 63mm Motors up to 6384 made from highest possible grade Aluminium 7075-T6 LF4 Hard Anadozised
Content 2 Pieces
€75.06 *
Board Stand - foldable Board Stand - foldable
Board Stand - foldable
3D Printed Board Stand - Foldable Best use one per each Truck
€34.11 *
E-Toxx Bull Bar E-Toxx Bull Bar
E-Toxx Bull Bar
Bullbar made from 7075-T6 Aluminium Fits for Trampa Channel Trucks: Infinity, Vertigo, Ultimate
€73.11 *
E-Toxx Maxi Gear Drive E-Toxx Maxi Gear Drive
E-Toxx Maxi Gear Drive
1: 6.25 gearing GearBox drive built for MBS Matrix 2. CNC-machined silent helical gears in Germany 3D Encoder housing: - lighter than CNC machined - Integrated encoder mounting system AS5047 with cable routing AS5047 Magnetic Encoder: -...
From €580.00 *
Motor pulley with 9T or 11T for motorshaft 8mm or 10mm
Motor pulley with 9T or 11T for motorshaft 8mm...
Motor pulley with 9, 10 or 11 teeth for 8mm or 10mm motor shaft, with or without keyway
From €20.96 *
E-Toxx Dual Belt Drive Trampa E-Toxx Dual Belt Drive Trampa
E-Toxx Dual Belt Drive Trampa
Suitable for Trampa Channeltrucks: INFINITY, VERTIGO, ULTIMATE with Trampa Superstar Hubs. Only for 8mm Motor shaft! Contains: 2 x Motor mounts 3 x Braces 2 x Support Bearing Holder 2 x Roller 2 x 72Z Pulley 2 x 12Z Motorpulley 2 x Belt...
€580.00 *
E-Toxx Dual Chain Drive Adapter set for Leopard LC8072 Motors E-Toxx Dual Chain Drive Adapter set for Leopard LC8072 Motors
E-Toxx Dual Chain Drive Adapter set for Leopard...
E-Toxx Dual Chain Drive Adapterset for Leopard LC8072 motors Contains: 2 x Leopard LC8072 Motor Adapter 12 x Spacer for connecting struts
€68.14 *
1 From 2
Viewed