The Chargery S400 is able to deliver up to 400 Watts at 2 Outputs. The enclosure is made of luxurious black anodized aluminium. The display shows the values of voltage and current during operation. The temperature controlled fan provides...

With this DIY set you can easily connect, charge and balance up to 17S batteries with just one connection cable. In the photo you can see the assembled cable in two views. The kit includes: 1 x silicone cable black 50cm 1 x silicone...

With this DIY set you can easily connect, charge and balance up to 14S batteries with just one connection cable. This is the charging socket for installation on the battery box.

The balancer adapters are for the use of LiPo battery packs with other balancer plug-in systems e.g. ULTRAMAT 8

The 14S lithium charger from Graupner has two charging ports and is designed to save space. Technical information Shutdown NiMH / NiCd: Delta Peak adjustable Connection socket type: 4 mm sockets Balancer connection: 1-32NiCd, NiMH /...

The 14S lithium charger from Graupner has two independent charging outputs. Charge your electric skateboard with constant current. Falling current characteristic after the end of charge voltage has been reached with automatic charge...

With the 12S lithium charger from Graupner you can charge the12S battery of your elecric Skateboard conveniently via the socket because it has the power supply integrated directly. Technical information: Shutdown NiMH / NiCd: Delta Peak...

The 12S charger / power supply S1500 from Chargery combines Nezteil with charger up to 12S incl. Balancer in one device. It can be used as a pure power supply or 12S charger with 1500W. Usable a When using DC voltage as input voltage, it...

specifications: Input voltage: DC 10-28V, 30V maximum Input current: 25A maximum Charging current: 0.1-20A, 500W maximum Discharge current: 0.1-10A, 35W maximum Accuracy of cell voltage: -5mV / + 5mV Quiescent current: 1.3A per cell for...

Battery case made of ABS. The lid is attached with four screws. Dimensions (WxHxD): 223x139x92 mm

Sturdy polypropylene case that protects your batteries from dirt, moisture and shocks. There is an all-round rubber seal in the lid. Inside the box is an interior padding with cube foam for precise adjustment. For example, two 6S LiPo...

Battery case made of ABS. The lid is attached with four screws. In the example photo there are two 6S LiPo batteries with 5400mAh in the box. Dimensions (WxHxD): 193x114x75 mm