Here you can find useful accessories for your charger, power supply or battery.

Here you can find useful accessories for your charger, power supply or battery. read more »
Close window

Here you can find useful accessories for your charger, power supply or battery.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
Combi charging cable - current balancer
Combi charging cable - current balancer
With this DIY set you can easily connect, charge and balance up to 17S batteries with just one connection cable. In the photo you can see the assembled cable in two views. The kit includes: 1 x silicone cable black 50cm 1 x silicone...
€29.95 *
Combo charging socket - current balancer Combo charging socket - current balancer
Combo charging socket - current balancer
With this DIY set you can easily connect, charge and balance up to 14S batteries with just one connection cable. This is the charging socket for installation on the battery box.
€9.95 *
Balancer adapter set PQ / TP / XH-Graupner, 2 - 6 cells
Balancer adapter set PQ / TP / XH-Graupner, 2 -...
The balancer adapters are for the use of LiPo battery packs with other balancer plug-in systems e.g. ULTRAMAT 8
€15.75 *
Battery Case 223x139x92
Battery Case 223x139x92
Battery case made of ABS. The lid is attached with four screws. Dimensions (WxHxD): 223x139x92 mm
€16.90 *
Battery Box 210x167x90mm suitcase Battery Box 210x167x90mm suitcase
Battery Box 210x167x90mm suitcase
Sturdy polypropylene case that protects your batteries from dirt, moisture and shocks. There is an all-round rubber seal in the lid. Inside the box is an interior padding with cube foam for precise adjustment. For example, two 6S LiPo...
€29.95 *
Batterie case 193x114x75 Batterie case 193x114x75
Batterie case 193x114x75
Battery case made of ABS. The lid is attached with four screws. In the example photo there are two 6S LiPo batteries with 5400mAh in the box. Dimensions (WxHxD): 193x114x75 mm
€16.90 *
APS 150A Watt Meter APS 150A Watt Meter
APS 150A Watt Meter
Never be surprised by a juice-less battery ever again. With this Watt meter you can monitor all the essential values of battery, enabling you to spot faults in your battery early on thus saving your battery from untimely demise Specs:...
€24.90 *
APS 200A Watt Meter
APS 200A Watt Meter
Never be surprised by a juice-less battery ever again. With this Watt meter you can monitor all the essential values of battery, enabling you to spot faults in your battery early on thus saving your battery from untimely demise Specs:...
€29.90 *
Junsi 406 DUO Y-Cable to load paralel 7 - 7 Pin
Junsi 406 DUO Y-Cable to load paralel 7 - 7 Pin
You'll nedd this cable if you want to load a single battery using both terminals of your Junsi 406 DUO and you want to keep an eye on the balancing
€4.30 *
Junsi 4010 DUO Y-Cable to load in parallel 11 - 11 Pin
Junsi 4010 DUO Y-Cable to load in parallel 11 -...
You'll need this cable to load a single battery using both terminals of your Junsi 4010 DUO charger and keep an eye on the balancing of the individual cells.
€5.40 *
Junsi 308 DUO Y-Cable to load in parallel 9 - 11 Pin
Junsi 308 DUO Y-Cable to load in parallel 9 -...
You'll need this cable if you want to load a single battery using both terminals of your Junsi 308 DUO charger and you want to keep an eye on the balancing of each cell.
€4.90 *
Junsi Balancer board CB1010-EH
Junsi Balancer board CB1010-EH
Junsi CB1010-AQP Adapter board for Kokam/Graupner, EHR to connect Lipo batteries with Robbe/Graupner/Kokam voltage-sensor cables to Junsi Chargers. suitable for the following battery configurations: 2S, 2*2S, 3*2S, 3S, 2*3S, 3*3S, 4S,...
€10.60 *
1 From 2
Viewed