Products from Junsi

You'll need this cable to load a single battery using both terminals of your Junsi 4010 DUO charger and keep an eye on the balancing of the individual cells.

You'll need this cable if you want to load a single battery using both terminals of your Junsi 308 DUO charger and you want to keep an eye on the balancing of each cell.

You'll nedd this cable if you want to load a single battery using both terminals of your Junsi 406 DUO and you want to keep an eye on the balancing

The Junsi iCharger 4010 is a compact 2 x 1400 Watt Charger which features an integrated balancer, USB port and micro SD-Card slot to save logs. Microprocessor driven High-Performance fast-charger/discharger with balancer Supported...

The Junsi iCharger 308 DUO is a powerful charging system capable of charging 2 battery(packs) in parallel Microprocessor driven High-Performance fast-charger/discharger and balancer Supported battery types: LiIo/LiPo/LiFe/NiZn,...

The Junsi 3010B is a microprocessor driven High-Performance fast-charger/discharger and balancer. It has enough power to load 10S battery packs with 30A Supported battery types: Li-Ion/LiPo/LiFe, NiMH/NiCd, Pb Number of cells: 1-10...

Junsi CB1010-AQP Adapter board for Kokam/Graupner, EHR to connect Lipo batteries with Robbe/Graupner/Kokam voltage-sensor cables to Junsi Chargers. suitable for the following battery configurations: 2S, 2*2S, 3*2S, 3S, 2*3S, 3*3S, 4S,...

Junsi CB1010-AQP adapter board for Multiplex, TP to connect Lipo batteries with Flightpower, Thunderpower, Multiplex voltage-sensor cables to junsi chargers. Suitable for the following battery pack configurations: 2S, 2*2S, 3*2S, 3S,...

Junsi CB1010-AQP adapter board for Polyquest, PQ to connect Lipo batteries with Polyquest, Hyperion, E-Tec voltage-sensor cables to Junsi chargers. Suitable for the following battery pack configurations: 2S, 2*2S, 3*2S, 3S, 2*3S, 3*3S,...

The Junsi 406 DUO 1400 Watt charger features an integrated balancer. USB connector and micro sd-card slot to save logs. Microprocessor driven High-Performance fast-charger/discharger and balancer Supported battery types:...

Tech Specs: Input voltage: 10 - 18VDC Charging current: 0,05 – 10A Max. charging power: 300W (When input voltage > 13,5V) Discharging power: Max. 30W Discharging current: 0,05 – 10A adjustable when feeding back into a lead battery...

Junsi CB1010-XH Balancer Adapter board for up to 10 Lithium-Akku cells with Align / Walkera XH Balancer connector Suitable for the following configurations: 2S, 2*2S, 3*2S, 3S, 2*3S, 3*3S, 4S, 2*4S, 5S, 2*5S, 6S A Balancer board takes...